Designed for use with woodwinds, the ATM350W UniMount mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491W woodwind mount and strong, flexible AT8490 5" gooseneck, the mic can be securely fastened to any woodwind instrument and positioned to stay where you want it – the gooseneck won’t flop around no matter how much you move the instrument as you play.

The microphone’s cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.

Low-profile mic design for minimum visibility

Crisp, clear, well-balanced microphone response, even at high SPLs

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

UniMount® woodwind mount attaches securely to any woodwind instrument via a flexible strap, providing excellent shock resistance for the microphone

Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play

In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise

Interchangeable elements available for hypercardioid and omnidirectional polar patterns

Included violin mount with hook-and-loop fastener provides an additional mounting option

MPN: ATM350W
UPC: 042005192311

• ELEMENT Fixed-charge back plate, permanently polarized condenser
  
• POLAR PATTERN Cardioid
  
• FREQUENCY RESPONSE 40 – 20,000 Hz
  
• LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
  
• OPEN CIRCUIT SENSITIVITY –49 dB (3.5 mV) re 1V at 1 Pa
  
• IMPEDANCE 200 ohms
  
• MAXIMUM INPUT SOUND LEVEL 159 dB SPL, 1 kHz at 1% T.H.D.
  
• DYNAMIC RANGE (typical) 130 dB, 1 kHz at Max SPL
  
• SIGNAL-TO-NOISE RATIO 65 dB, 1 kHz at 1 Pa
  
• PHANTOM POWER REQUIREMENTS 11– 52V DC, 3.5 mA typical
  
• SWITCH Flat, roll-off
  
• WEIGHT (MICROPHONE) 14.5 g (0.5 oz)
  WEIGHT (POWER MODULE) 90 g (3.2 oz)
  
• DIMENSIONS (MICROPHONE) 37.8 mm (1.49'') long,
  12.2 mm (0.48'') maximum body diameter
  
• DIMENSIONS (POWER MODULE) 92 mm (3.62") long,
  18.9 mm (0.74") diameter
  
• OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
  CABLE 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
  
• OPTIONAL INTERCHANGEABLE ELEMENTS UE-H hypercardioid (100°);
  
• UE-O omnidirectional (360°)
  
• ACCESSORIES FURNISHED ATM350a cardioid condenser microphone; AT8543 power module; AT8491W UniMount® woodwind mount; AT8490 UniMount® 5" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case