The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.

The integrated Rycote® Lyre® based shock mounting system isolates the VideoMic capsule and electronics from its all-metal shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand.

By employing a super-cardioid polar pattern the VideoMic becomes highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.

In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

The RØDE VideoMic directional on-camera microphone is designed in Australia and covered by RØDE Microphones' industry leading 10 year warranty.

MPN: Videomic
UPC: 698813002900

• Rycote Lyre Mount
  
• Half inch professional grade microphone
  
• Attaches to consumer video cameras
  
• 0.375 inch standard boom pole threads
  
• 80 Hz high pass filter
  
  
• Studio recording quality
  
• Condenser microphone
  
• Super-cardioid polar pattern
  
• 9V battery power
  
• Integrated Rycote® Lyre® shock mounting
  
• Two step High Pass Filter (Flat/80Hz)
  
• Three step PAD (0, -10, -20dB)
  
• Rugged reinforced ABS construction
  
• Windshield included
  
• 3.5mm mini-jack output
  
• Integrated cold-shoe mount (3/8" thread)
  
• 10 year extended warranty when you register your microphone
  
  
• Acoustic Principle Line Gradient
  
• Active Electronics JFET impedance converter
  
• Capsule 0.50"
  
• Polar Pattern Supercardioid
  
• Address Type End
  
• Frequency Range 40Hz - 20kHz
  
• Output Impedance 200Ω
  
• Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  
• Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  
• Equivalent Noise Level (A-weighted) 20dB-A
  
• Power Options 9V Battery
  
• Weight 176.00gm
  
• Dimensions 65.00mmH x 102.00mmW x 250.00mmD
  
• Output Minijack Output
  
• Warranty 1 year with free extension to 10 years following registration here
  
  IN THE BOX:
  
• VideoMic
  
• Directional On-camera Microphone