Studio Pack
Contains one GXL2200BP Cardioid Condenser, one GXL1200BP Small Diaphram Cardioid Condenser, one MH110 Studio Headphone, and one EPF15A Pop Filter. Shock mount and mic clip are included. P48 (48V) phantom power is required.

GXL2200BP Cardioid Condenser
The condenser microphone consists of a thin conductive membrane stretched very close to a stationary plate. High voltage is applied between the membrane and the plate. As the membrane vibrates, electrons move. These moving electrons are sensed as voltage. This voltage can be strengthened (but not necessarily increased) by silicon. The GXL2200 is inspired cosmetically, mechanically, and electrically by early generations of European masters. Features include (but are not limited to) an internal hi-pass filter. Elastic shock mount and protective pouch are included. P48 (48V) phantom power is required.

GXL1200BP Small Diaphram Cardioid Condenser
Point-source transduction, field-effect detection, and pure high voltage. Capture your instrumentation with exacting detail. Proximity effect is inversely proportional to distance. Play it right this time. Mic clip and protective pouch are included. P48 (48V) phantom power is required.

MPN: GXL2200BPSP
UPC: 631922105797

GXL2200BP Cardioid Condenser

• Applications: Studio Vocals, Voice-over, Choir, Acoustic Instrument, Strings, Piano, Cymbals/Overheads.
  
• Operating Principle: Externally-biased condenser
  
• Polar Pattern: Cardioid
  
• Frequency Response: 30Hz to 20KHz
  
• Sensitivity: -36dBV (16mV) @ 1 Pa
  
• Impedance: 75 ohms
  
• Max SPL: 130dB, 1% THD
  
• Self Noise: 20dBA
  
• Power Requirements: P48, 3mA
  
  GXL1200BP Small Diaphram Cardioid Condenser
  
• Applications: Choir, Orchestra, Acoustic Instrument, Guitar Cabinets, Strings, Piano, Cymbals/Overheads, Hi-hat.
  
• Operating Principle: Externally-biased condenser
  
• Polar Pattern: Cardioid
  
• Frequency Response: 30Hz to 20KHz
  
• Sensitivity: -36dBV (16mV) @ 1 Pa
  
• Impedance: 100 ohms
  
• Max SPL: 135dB, 1% THD
  
• Self Noise: 17dBA
  
• Power Requirements: P48, 4mA
  
  
• EPF15A Pop Filter
  
• Shock mount and mic clip are included
  
• P48 (48V) phantom power is required